Axe Frog and Blade Cover Combo Sturdy heavy leather axe frog and cover This Frog is made with heavy armor weight leather dyed in your choice of colors, Axe rests in a nickel plated welded ring. Made by customer standards in right handed (shown), left handed, or vertical hang suitable for wear on either side. Blade guard is made with a medium-heavy leather glued and riveted. Please send a tracing of the blade to be covered as well as the dimensions of thickness of the blade as well as the diameter of the widest part of the axe handle/head for a proper fit for your axe. See our contacts page for mailing address. Click photo for a bigger picture. Our Price $40.00

Hand Axe Blade Cover Sometimes you just gotta Some ren faires do not allow you to carry uncovered blades even when they ARE peace tied. These axe blade covers will "cover you" in this situation. Each cover is built around the shape of YOUR axe, not just some generic axe from wally world. We have to have a pencil tracing of the axe blade from handle to cutting edge in order to make the cover fit your axe. See our contacts page for mailing address. The cover in the picture was designed with a latigo lace tying the cover to the axe head, but covers are available with a strap and snap closure as well as a strap/buckle type closure. Click HERE for a closeup picture.   Our Price $15.00

Simple Baldric and frog Sturdy Baldric and Frog This baldric and the base of the frog are made from a medium tooling leather approximately 3/32 inch thick. The scabbard holder portion is made of a supple upholstery cowhide in a wide variety of colors using either nickel plated or brass hardware. Please contact us for available colors and combinations. Click photo for a better view.       Our Price $45.00

Boot Straps Decorative Boot Straps/spur leathers For use as decoration, or can be made as spur leathers by customer choice. A variety of conchos are available as well as different dye colors. Please contact us for color and decoration options. Click photo for a larger picture.   Our Price $20.00

Waist Cincher Belt Serious Leather! This belt comes in your choice of colors and the price includes simple tooling as seen in the photo(more elaborate tooling available at an additional cost). Belt is made of heavy saddle skirting and will withstand pretty much anything you throw at it. Fastened on each side by two 1" straps with roller buckles, it's sure to stay in place. Three nickel plated rivets hold each strap end firmly attached to the belt. Belt consists of a large front section (see photo) and a rear kidney belt section measuring 3-1/2 to 5 inches wide(customers choice) Each belt is made to the customers personal specifications and measurements.   Our Price $125.00

Flask with Holder Something every renny should have Simple 8 oz. flask with holder. Flask is stainless steel and has a screw on top that is permanently attached to the flask so you won't lose it. Belt loop on back can handle up to a 3 inch belt(wider belt loops by special order)This pouch comes in your choice of colors. Custom tooling and decoration available at a small additional charge. Holder is made of a medium weight vegetable tanned leather with a snap closure that holds the flask in place. Nickel plated rivets are used throughout to assure a solid and long lasting accessory.   Our Price $30.00

Custom Knife Sheath Knife sheaths custom made for any application or knife. Made with a medium or heavy vegetable tanned leather, our sheaths are made specifically to each blade. The sheath in the picture is a formed fit behind the belt worn sheath that is tied in place by the lacing you see. In this configuration it can be worn on either side, facing whichever direction you choose. Prices will vary depending on the knife size, sheath type, and tooling/decoration desired. Please contact us with your needs and we will be happy to give you a quote. Click HERE or HERE for other knife sheath samples. If you mail a simple pencil tracing of the outline of the blade as well as the thickness, I can give a more accurate quote. See our  contacts  page for mailing address.   Our Price

Leather Rose Favor Pins Introductory offer Free Shipping! Leather Rose Favor Pins Our best seller this year by far is our little leather rose favor pins. Made with a lightweight leather in a very wide variety of colors, these pins will stand you in good stead with anyone you choose to give them to. The average size of each rose is approximately 1/2 inch, but vary depending on the thickness of the leather. The pins are available in different configurations from a larger single rose to three small roses. Click HERE for sample pictures.   Our Price $5.00

Leather Rose Hair Barrettes Introductory offer Free Shipping! Leather Rose Hair Decoration A favorite with the ladies everywhere we go. Made with a lightweight leather in a very wide variety of colors, these hair barrettes draw attention and look good too! The average size of each rose is approximately 3/4 inch, but vary depending on the thickness of the leather. Barrettes are available in different configurations from a larger single rose to three small roses. Click HERE for sample pictures.   Our Price $5.00

Leather Roses Introductory offer Free Shipping! What says "I love you" like leather? Imagine it, roses that never die and always have that heavenly leather smell! You are sure to make an impression with these pretty little things and at a price anyone can afford. Made with medium/lightweight leather in all sorts of cool colors. This particular type of leather rose is usually made with somewhat thicker leather for body and is easy to shape to suit your own tastes. The average size of each rose is approximately 2 inches with a 6 inch wire stem wrapped with florist tape. Sizes vary depending on the thickness of the leather. Click HERE for sample pictures.   Our Price $7.00

Painted Leather Roses Introductory offer Free Shipping! Vegetable tanned leather roses These roses are much more detailed than the roses above with a lot more petals as well as being hand formed and painted. Made from very thin vegetable tanned leather (like belt leather only much thinner) these roses take up to a week each to complete. A lot of care goes into the forming of the individual petals long before the rose ever sees the paintbrush. Click HERE for a close up picture.   Our Price $20.00

Simple Tankard/mug hanger Another of those "have to have" things Medium weight leather tankard/mug strap in a wide variety of colors, The basic mug strap has a plain heavy duty snap closure and comes with or without simple tooling. Standard colors are black, antique brown, red, and natural(unfinished) with hardware in either nickel plate or brass(please specify).      Our Price $9.00

Tankard Wrap A nice thing to help keep your beverage hot/cold Medium/light weight leather tankard wrap in a wide variety of colors, The basic wrap is a held in place with a leather lace through eyelets in either brass or nickel plate. Options include decorative conchos and/or custom tooling(at a small additional cost). We will need the dimensions of your tankard to make the correct size. Please contact us for a quote on customizing your tankard wrap.      Our Price $20.00